2M Wingspan > B-24 LIBERATOR
B-24 LIBERATOR
Item No : FLW401
No Any Brief Introduction...
Color
  • Green
Support Versions
  • Standard Version
  • Upgrade Version
  • Deluxe Version
Support Fittings
  • Whole
  • PNP
  • ARF Plus
  • Air frame
FEATURES VIDEOS SPECIFICATIONS SPARE PARTS SUPPORT
Overviews
       The famed B-24 Liberator is one of the most recognizable WWII aircraft of all time. Serving in every theater of that global conflict, the B-24 fought to bring its brave crews home through unimaginable danger. With humility and reverence, FlightLineRC and Motion RC are proud to introduce the world’s first foam electric PNP B-24 Liberator, in remembrance of the crews who gave the ultimate sacrifice and those who carry on its memory.
       The FlightLineRC B-24 is approximately 1/10 scale, with a 2000mm wingspan and 1230mm length. Constructed from EPO foam and reinforced with integrated aluminum, carbon, and plastic structures, the B-24 delivers the ultimate all around experience for pilots seeking the ultimate foam PNP bomber replica. A magnetic nose section allows owners to swap between two B-24 variants, the -D (”Greenhouse” nose), and the -J (”Emerson turret” nose). The Upper Turret on both variants and the Nose Turret on the -J variant can be panned with an optional servo. Steerable tillers are pre-installed, including special provisions to fit FPV cameras inside. 
       The FlightLineRC B-24 uses four 3530-860KV brushless outrunner motors and four 30A ESCs. A quick disconnect ribbon wire harness consolidates wiring into a central circuit board in the fuselage. The recommended pair of 4s 14.8V 2800-4000mAh lipo batteries 2pcs can power the aircraft in excess of 110kph/70mph, for 4-10 minutes based on a pilot’s throttle management. The outboard motor pair and inboard motor pair are run from separate flight batteries, allowing for powered landings in the event of one battery failing. A 70mm tall nose wheel and 85mm tail main wheels provide stable operation grass runways, and optional suspension struts are available. Assembly is comprised of only 12 screws and gluing on external details such as antennas.

No Flight Video!

Fuselage
FLW40101
Main wing
FLW40102
Horizontal tail
FLW40103
Vertical tail
FLW40104
B-24D Liberator Nose
FLW40105D
B-24J Liberator Nose
FLW40105J
Cockpit
FLW40106
Canopy
FLW401061
Sticker
FLW40107
Nose landing gear
FLW401081
Left landing gear
FLW401082
Right landing gear
FLW401083

Standard Version

Wingspan 2000mm(78.7in.)
Length 1230mm(48.4in.)
Flying Weight 2910g(without battery)
Power System 3530-860KV brushless outrunner motor (4pcs)
Electronic Speed Control 30A(4pcs)
Propeller/EDF 3-Blade 9.5x7 (4Piecs Standard/Reverse)
Servos 9g digital metal gear servo (9pcs)
Landing Gear Retractable, Suspension
Wheels Nose gear / Main gear 70mm / 85mm
Required Battery 4S 2800-4000mAh 35C (2pcs)
Required Radio >6CH
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps Yes
Lights
Others
Hinge Type Nylon hinges on all surfaces
Material EPO Foam & ABS
Skill Level Intermediate
Build Time 1 Hour
Recommended Environment Outdoor

MANUALS

VIDEOS

EXTRAS

HELP

如果以上内容未能解决您的问题,您可以通过以下方式联系我们。

Email: service@sz-freewing.com
Tel: +86 769 82 669 669

工作时间:周一至周五   AM 09:00 ~ 12:00    PM 13:30 ~ 17:00



B-24 LIBERATOR
Item No.:FLW401
东莞市飞翼电子科技有限公司   版权所有   Copyright © 2015 Freewing. All rights reserved. 粤ICP备05144415